Dennis/srdl2sv
1
0
Fork 0
mirror of https://github.com/Silicon1602/srdl2sv.git synced 2024-12-22 23:08:39 +00:00
Code Issues Projects Releases Wiki Activity
719b013b88
srdl2sv/examples/parameters/srdl2sv_out/paremeters.sv

501 lines
17 KiB
Systemverilog
Raw Blame History

/*****************************************************************
*
* ███████╗██████╗ ██████╗ ██╗ ██████╗ ███████╗██╗ ██╗
* ██╔════╝██╔══██╗██╔══██╗██║ ╚════██╗██╔════╝██║ ██║
* ███████╗██████╔╝██║ ██║██║ █████╔╝███████╗██║ ██║
* ╚════██║██╔══██╗██║ ██║██║ ██╔═══╝ ╚════██║╚██╗ ██╔╝
* ███████║██║ ██║██████╔╝███████╗███████╗███████║ ╚████╔╝
* ╚══════╝╚═╝ ╚═╝╚═════╝ ╚══════╝╚══════╝╚══════╝ ╚═══╝
*
* The present RTL was generated by srdl2sv v0.01. The RTL and all
* templates the RTL is derived from are licensed under the MIT
* license. The license is shown below.
*
* srdl2sv itself is licensed under GPLv3.
*
* Maintainer : Dennis Potter <dennis@dennispotter.eu>
* Report Bugs: https://github.com/Silicon1602/srdl2sv/issues
*
* ===GENERATION INFORMATION======================================
*
* Generation information:
* - User: : dpotter
* - Time : November 04 2021 23:31:13
* - Path : /home/dpotter/srdl2sv/examples/parameters
* - RDL file : ['parameters.rdl']
* - Hostname : ArchXPS
*
* RDL include directories:
* -
*
* Commandline arguments to srdl2sv:
* - Ouput Directory : srdl2sv_out
* - Stream Log Level : INFO
* - File Log Level : NONE
* - Use Real Tabs : False
* - Tab Width : 4
* - Enums Enabled : True
* - Unpacked I/Os : True
* - Register Bus Type: amba3ahblite
* - Address width : 32
* - Byte enables : True
* - Descriptions : {'AddrMap': False, 'RegFile': False, 'Memory': False, 'Register': False, 'Field': False}
*
* ===LICENSE OF PAREMETERS.SV=====================================
*
* Copyright 2021 Dennis Potter <dennis@dennispotter.eu>
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
****************************************************************/
module paremeters
(
// Resets
input rst_async_n,
// Inputs
input clk ,
input HRESETn ,
input [31:0] HADDR ,
input HWRITE ,
input [2:0] HSIZE ,
input [3:0] HPROT ,
input [1:0] HTRANS ,
input [32-1:0] HWDATA ,
input HSEL ,
input [31:0] reg32__data_in ,
input [31:0] reg32_arr__data_in[8],
input [15:0] reg16__data_in ,
input [7:0] reg8__data_in ,
// Outputs
output HREADYOUT ,
output HRESP ,
output [32-1:0] HRDATA ,
output [31:0] reg32__data_r ,
output [31:0] reg32_arr__data_r[8],
output [15:0] reg16__data_r ,
output [7:0] reg8__data_r
);
// Internal signals
srdl2sv_widget_if #(.ADDR_W (32), .DATA_W(32)) widget_if;
/*******************************************************************
* AMBA 3 AHB Lite Widget
* ======================
* Naming conventions
* - widget_if -> SystemVerilog interface to between widgets
* and the internal srdl2sv registers.
* - H* -> Signals as defined in AMBA3 AHB Lite
* specification
* - clk -> Clock that drives registers and the bus
*******************************************************************/
srdl2sv_amba3ahblite
#(.FLOP_REGISTER_IF (0),
.BUS_BITS (32),
.NO_BYTE_ENABLE (0))
srdl2sv_amba3ahblite_inst
(// Bus protocol
.HRESETn,
.HCLK (clk),
.HADDR,
.HWRITE,
.HSIZE,
.HPROT,
.HTRANS,
.HWDATA,
.HSEL,
.HREADYOUT,
.HRESP,
.HRDATA,
// Interface to internal logic
.widget_if);
genvar gv_a;
/*******************************************************************
/*******************************************************************
/* REGISTER : reg32
/* DIMENSION : 0
/* DEPTHS (per dimension): []
/*******************************************************************
/*******************************************************************/
logic reg32_active ;
logic reg32_sw_wr ;
logic [31:0] reg32_data_mux_in;
logic reg32_rdy_mux_in ;
logic reg32_err_mux_in ;
logic [31:0] reg32__data_q ;
// Register-activation for 'reg32'
assign reg32_active = widget_if.addr == 0;
assign reg32_sw_wr = reg32_active && widget_if.w_vld;
//-----------------FIELD SUMMARY-----------------
// name : data (reg32[31:0])
// access : hw = rw
// sw = rw (precedence)
// reset : active_low / asynchronous
// flags : ['sw']
// external : False
// storage type : StorageType.FLOPS
//-----------------------------------------------
always_ff @(posedge clk or negedge rst_async_n)
if (!rst_async_n)
begin
reg32__data_q <= 32'd0;
end
else
begin
if (reg32_sw_wr)
begin
if (widget_if.byte_en[0])
reg32__data_q[7:0] <= widget_if.w_data[7:0];
if (widget_if.byte_en[1])
reg32__data_q[15:8] <= widget_if.w_data[15:8];
if (widget_if.byte_en[2])
reg32__data_q[23:16] <= widget_if.w_data[23:16];
if (widget_if.byte_en[3])
reg32__data_q[31:24] <= widget_if.w_data[31:24];
end
else
// we or wel property not set
reg32__data_q <= reg32__data_in;
end // of reg32__data's always_ff
// Connect register to hardware output port
assign reg32__data_r = reg32__data_q;
/**************************************
* Assign all fields to signal to Mux *
**************************************/
// Assign all fields. Fields that are not readable are tied to 0.
assign reg32_data_mux_in = {reg32__data_q};
// Internal registers are ready immediately
assign reg32_rdy_mux_in = 1'b1;
// Return an error if *no* read and *no* write was succesful. If some bits
// cannot be read/written but others are succesful, don't return and error
// Hence, as long as one action can be succesful, no error will be returned.
assign reg32_err_mux_in = !((widget_if.r_vld && (|widget_if.byte_en[3:0])) || (widget_if.w_vld && (|widget_if.byte_en[3:0])));
/*******************************************************************
/*******************************************************************
/* REGISTER : reg32_arr
/* DIMENSION : 1
/* DEPTHS (per dimension): [8]
/*******************************************************************
/*******************************************************************/
logic reg32_arr_active [8];
logic reg32_arr_sw_wr [8];
logic [31:0] reg32_arr_data_mux_in[8];
logic reg32_arr_rdy_mux_in [8];
logic reg32_arr_err_mux_in [8];
logic [31:0] reg32_arr__data_q [8];
generate
for (gv_a = 0; gv_a < 8; gv_a++)
begin
// Register-activation for 'reg32_arr'
assign reg32_arr_active[gv_a] = widget_if.addr == 4+(gv_a*4);
assign reg32_arr_sw_wr[gv_a] = reg32_arr_active[gv_a] && widget_if.w_vld;
//-----------------FIELD SUMMARY-----------------
// name : data (reg32_arr[31:0])
// access : hw = rw
// sw = rw (precedence)
// reset : active_low / asynchronous
// flags : ['sw']
// external : False
// storage type : StorageType.FLOPS
//-----------------------------------------------
always_ff @(posedge clk or negedge rst_async_n)
if (!rst_async_n)
begin
reg32_arr__data_q[gv_a] <= 32'd0;
end
else
begin
if (reg32_arr_sw_wr[gv_a])
begin
if (widget_if.byte_en[0])
reg32_arr__data_q[gv_a][7:0] <= widget_if.w_data[7:0];
if (widget_if.byte_en[1])
reg32_arr__data_q[gv_a][15:8] <= widget_if.w_data[15:8];
if (widget_if.byte_en[2])
reg32_arr__data_q[gv_a][23:16] <= widget_if.w_data[23:16];
if (widget_if.byte_en[3])
reg32_arr__data_q[gv_a][31:24] <= widget_if.w_data[31:24];
end
else
// we or wel property not set
reg32_arr__data_q[gv_a] <= reg32_arr__data_in[gv_a];
end // of reg32_arr__data's always_ff
// Connect register to hardware output port
assign reg32_arr__data_r[gv_a] = reg32_arr__data_q[gv_a];
/**************************************
* Assign all fields to signal to Mux *
**************************************/
// Assign all fields. Fields that are not readable are tied to 0.
assign reg32_arr_data_mux_in[gv_a] = {reg32_arr__data_q[gv_a]};
// Internal registers are ready immediately
assign reg32_arr_rdy_mux_in[gv_a] = 1'b1;
// Return an error if *no* read and *no* write was succesful. If some bits
// cannot be read/written but others are succesful, don't return and error
// Hence, as long as one action can be succesful, no error will be returned.
assign reg32_arr_err_mux_in[gv_a] = !((widget_if.r_vld && (|widget_if.byte_en[3:0])) || (widget_if.w_vld && (|widget_if.byte_en[3:0])));
end // of for loop with iterator gv_a
endgenerate
/*******************************************************************
/*******************************************************************
/* REGISTER : reg16
/* DIMENSION : 0
/* DEPTHS (per dimension): []
/*******************************************************************
/*******************************************************************/
logic reg16_active ;
logic reg16_sw_wr ;
logic [15:0] reg16_data_mux_in;
logic reg16_rdy_mux_in ;
logic reg16_err_mux_in ;
logic [15:0] reg16__data_q ;
// Register-activation for 'reg16'
assign reg16_active = widget_if.addr == 36;
assign reg16_sw_wr = reg16_active && widget_if.w_vld;
//-----------------FIELD SUMMARY-----------------
// name : data (reg16[15:0])
// access : hw = rw
// sw = rw (precedence)
// reset : active_low / asynchronous
// flags : ['sw']
// external : False
// storage type : StorageType.FLOPS
//-----------------------------------------------
always_ff @(posedge clk or negedge rst_async_n)
if (!rst_async_n)
begin
reg16__data_q <= 16'd0;
end
else
begin
if (reg16_sw_wr)
begin
if (widget_if.byte_en[0])
reg16__data_q[7:0] <= widget_if.w_data[7:0];
if (widget_if.byte_en[1])
reg16__data_q[15:8] <= widget_if.w_data[15:8];
end
else
// we or wel property not set
reg16__data_q <= reg16__data_in;
end // of reg16__data's always_ff
// Connect register to hardware output port
assign reg16__data_r = reg16__data_q;
/**************************************
* Assign all fields to signal to Mux *
**************************************/
// Assign all fields. Fields that are not readable are tied to 0.
assign reg16_data_mux_in = {reg16__data_q};
// Internal registers are ready immediately
assign reg16_rdy_mux_in = 1'b1;
// Return an error if *no* read and *no* write was succesful. If some bits
// cannot be read/written but others are succesful, don't return and error
// Hence, as long as one action can be succesful, no error will be returned.
assign reg16_err_mux_in = !((widget_if.r_vld && (|widget_if.byte_en[1:0])) || (widget_if.w_vld && (|widget_if.byte_en[1:0])));
/*******************************************************************
/*******************************************************************
/* REGISTER : reg8
/* DIMENSION : 0
/* DEPTHS (per dimension): []
/*******************************************************************
/*******************************************************************/
logic reg8_active ;
logic [7:0] reg8_data_mux_in;
logic reg8_rdy_mux_in ;
logic reg8_err_mux_in ;
logic [7:0] reg8__data_q ;
// Register-activation for 'reg8'
assign reg8_active = widget_if.addr == 38;
//-----------------FIELD SUMMARY-----------------
// name : data (reg8[7:0])
// access : hw = rw
// sw = r (precedence)
// reset : active_low / asynchronous
// flags : ['sw']
// external : False
// storage type : StorageType.FLOPS
//-----------------------------------------------
always_ff @(posedge clk or negedge rst_async_n)
if (!rst_async_n)
begin
reg8__data_q <= 8'd0;
end
else
begin
// we or wel property not set
reg8__data_q <= reg8__data_in;
end // of reg8__data's always_ff
// Connect register to hardware output port
assign reg8__data_r = reg8__data_q;
/**************************************
* Assign all fields to signal to Mux *
**************************************/
// Assign all fields. Fields that are not readable are tied to 0.
assign reg8_data_mux_in = {reg8__data_q};
// Internal registers are ready immediately
assign reg8_rdy_mux_in = 1'b1;
// Return an error if *no* read and *no* write was succesful. If some bits
// cannot be read/written but others are succesful, don't return and error
// Hence, as long as one action can be succesful, no error will be returned.
assign reg8_err_mux_in = !((widget_if.r_vld && (widget_if.byte_en[0])) || (widget_if.w_vld && (1'b0)));
// Read multiplexer
always_comb
begin
unique case (1'b1)
reg32_active:
begin
widget_if.r_data = reg32_data_mux_in;
widget_if.err = reg32_err_mux_in;
widget_if.rdy = reg32_rdy_mux_in;
end
reg32_arr_active[0]:
begin
widget_if.r_data = reg32_arr_data_mux_in[0];
widget_if.err = reg32_arr_err_mux_in[0];
widget_if.rdy = reg32_arr_rdy_mux_in[0];
end
reg32_arr_active[1]:
begin
widget_if.r_data = reg32_arr_data_mux_in[1];
widget_if.err = reg32_arr_err_mux_in[1];
widget_if.rdy = reg32_arr_rdy_mux_in[1];
end
reg32_arr_active[2]:
begin
widget_if.r_data = reg32_arr_data_mux_in[2];
widget_if.err = reg32_arr_err_mux_in[2];
widget_if.rdy = reg32_arr_rdy_mux_in[2];
end
reg32_arr_active[3]:
begin
widget_if.r_data = reg32_arr_data_mux_in[3];
widget_if.err = reg32_arr_err_mux_in[3];
widget_if.rdy = reg32_arr_rdy_mux_in[3];
end
reg32_arr_active[4]:
begin
widget_if.r_data = reg32_arr_data_mux_in[4];
widget_if.err = reg32_arr_err_mux_in[4];
widget_if.rdy = reg32_arr_rdy_mux_in[4];
end
reg32_arr_active[5]:
begin
widget_if.r_data = reg32_arr_data_mux_in[5];
widget_if.err = reg32_arr_err_mux_in[5];
widget_if.rdy = reg32_arr_rdy_mux_in[5];
end
reg32_arr_active[6]:
begin
widget_if.r_data = reg32_arr_data_mux_in[6];
widget_if.err = reg32_arr_err_mux_in[6];
widget_if.rdy = reg32_arr_rdy_mux_in[6];
end
reg32_arr_active[7]:
begin
widget_if.r_data = reg32_arr_data_mux_in[7];
widget_if.err = reg32_arr_err_mux_in[7];
widget_if.rdy = reg32_arr_rdy_mux_in[7];
end
reg16_active:
begin
widget_if.r_data = reg16_data_mux_in;
widget_if.err = reg16_err_mux_in;
widget_if.rdy = reg16_rdy_mux_in;
end
reg8_active:
begin
widget_if.r_data = reg8_data_mux_in;
widget_if.err = reg8_err_mux_in;
widget_if.rdy = reg8_rdy_mux_in;
end
default:
begin
// If the address is not found, return an error
widget_if.r_data = 0;
widget_if.err = 1;
widget_if.rdy = widget_if.r_vld || widget_if.w_vld;
end
endcase
end
endmodule
Reference in New Issue View Git Blame Copy Permalink