Add option to add no bus-widget

If this option is defined, there will be a direct interface to the b2r
and r2b interface. The structs will be flattened out to wires for legacy
reasons.

This closes #3.

README.md

@@ -81,8 +81,8 @@ The following bus protocols are planned at this point:
 # Help function
 A comprehensive help function of the tool can be invoked by running `srdl2sv --help`.
 ```
-usage: main.py [-h] [-b {amba3ahblite}] [-c DESCRIPTIONS]
-               [-d SEARCH_PATHS [SEARCH_PATHS ...]] [-e]
+usage: srdl2sv [-h] [-a ADDRESS_WIDTH] [-b {simple,amba3ahblite}]
+               [-c DESCRIPTIONS] [-d SEARCH_PATHS [SEARCH_PATHS ...]] [-e]
                [--file_log_level {DEBUG,INFO,WARNING,ERROR,CRITICAL,NONE}]
                [--stream_log_level {DEBUG,INFO,WARNING,ERROR,CRITICAL,NONE}]
                [--no_byte_enable] [-o OUT_DIR] [-r] [--real_tabs]
@@ -96,10 +96,15 @@ positional arguments:
 
 optional arguments:
   -h, --help            show this help message and exit
-  -b {amba3ahblite}, --bus {amba3ahblite}
+  -a ADDRESS_WIDTH, --address_width ADDRESS_WIDTH
+                        Set the address width of the register space. For some
+                        protocols, the default as described in the
+                        specification is used. (default: 32)
+  -b {simple,amba3ahblite}, --bus {simple,amba3ahblite}
                         Set the bus protocol that shall be used by software to
-                        ', communicate with the registers. (default:
-                        amba3ahblite)
+                        communicate with the registers. If just a simple
+                        interface to the registers is needed, use the 'simple'
+                        protocol. (default: amba3ahblite)
   -c DESCRIPTIONS, --descriptions DESCRIPTIONS
                         Include descriptions of addrmaps (+16), regfiles (+8),
                         memories (+4) registers (+2), and fields (+1) in RTL.

srdl2sv/cli/cli.py

@@ -20,13 +20,24 @@ class CliArguments():
         self.parser = argparse.ArgumentParser(
             description="SystemRDL 2 SystemVerilog compiler")
 
+        self.parser.add_argument(
+            "-a",
+            "--address_width",
+            default=32,
+            type=int,
+            help="Set the address width of the register space. For some \
+                  protocols, the default as described in the specification \
+                  is used. (default: %(default)s)")
+
         self.parser.add_argument(
             "-b",
             "--bus",
-            choices=['amba3ahblite'],
+            choices=['simple', 'amba3ahblite'],
             default='amba3ahblite',
-            help="Set the bus protocol that shall be used by software to ',\
-                  communicate with the registers. (default: %(default)s)")
+            help="Set the bus protocol that shall be used by software to \
+                  communicate with the registers. If just a simple interface \
+                  to the registers is needed, use the 'simple' protocol. \
+                  (default: %(default)s)")
 
         self.parser.add_argument(
             "-c",
@@ -163,8 +174,15 @@ class CliArguments():
         config['bus'] = args.bus
         config['list_args'].append(f"Register Bus Type: {config['bus']}")
 
+        # Address width
         if args.bus == 'amba3ahblite':
             config['addrwidth'] = 32
+            config['addrwidth_bus_spec'] = True
+        else:
+            config['addrwidth'] = args.address_width
+            config['addrwidth_bus_spec'] = False
+
+        config['list_args'].append(f"Address width    : {config['addrwidth']}")
 
         # Byte enables?
         config['no_byte_enable'] = args.no_byte_enable

srdl2sv/components/addrmap.py

@@ -293,8 +293,10 @@ class AddrMap(Component):
 
         return self._process_yaml(
             self.widget_templ_dict['module_instantiation'],
-            {'bus_width': self.regwidth,
+            {'bus_width': self.get_regwidth(),
              'no_byte_enable': 1 if self.config['no_byte_enable'] else 0,
+             'addr_width': self.config['addrwidth'],
+             'bus_width_byte': int(self.get_regwidth() / 8),
             }
         )
 

srdl2sv/components/widgets/srdl2sv_simple.yaml

@@ -0,0 +1,45 @@
+# This file only contains the instantiation of the module
+module_instantiation:
+    rtl: |-
+        /*******************************************************************
+         * CPU Interface
+         * ======================
+         * Naming conventions
+         *    - r2b.*     -> Signals from registers to bus
+         *    - b2r.*     -> Signals from bus to registers
+         *    - clk       -> Clock that drives registers and the bus
+         *******************************************************************/
+        assign b2r.addr     = cpuif_address_i;
+        assign b2r.data     = cpuif_data_i;
+        assign b2r.w_vld    = cpuif_wr_vld_i;
+        assign b2r.r_vld    = cpuif_rd_vld_i;
+        assign b2r.byte_en  = {no_byte_enable} ? {{{bus_width_byte}{{1'b1}}}} : cpuif_byte_enable_i;
+
+        assign cpuif_data_o = r2b.data; 
+        assign cpuif_rdy_o  = r2b.rdy;
+        assign cpuif_err_o  = r2b.err;
+    signals:
+        - name: 'b2r'
+          signal_type: 'b2r_t'
+        - name: 'r2b'
+          signal_type: 'r2b_t'
+    input_ports:
+        - name: 'clk'
+          signal_type: ''
+        - name: 'cpuif_address_i'
+          signal_type: '[{addr_width}-1:0]'
+        - name: 'cpuif_wr_vld_i'
+          signal_type: ''
+        - name: 'cpuif_rd_vld_i'
+          signal_type: ''
+        - name: 'cpuif_data_i'
+          signal_type: '[{bus_width}-1:0]'
+        - name: 'cpuif_byte_enable_i'
+          signal_type: '[{bus_width_byte}-1:0]'
+    output_ports:
+        - name: 'cpuif_err_o'
+          signal_type: ''
+        - name: 'cpuif_rdy_o'
+          signal_type: ''
+        - name: 'cpuif_data_o'
+          signal_type: '[{bus_width}-1:0]'

srdl2sv/srdl2sv.py

@@ -72,16 +72,26 @@ def main():
                 print(value, file=file)
 
     # Copy over widget RTL from widget directory
-    widget_rtl = pkg_resources.read_text(widgets, f"srdl2sv_{config['bus']}.sv")
+    try:
+        widget_rtl = pkg_resources.read_text(widgets, f"srdl2sv_{config['bus']}.sv")
 
-    out_widget_file = f"{config['output_dir']}/srdl2sv_{config['bus']}.sv"
+        out_widget_file = f"{config['output_dir']}/srdl2sv_{config['bus']}.sv"
 
-    with open(out_widget_file, 'w', encoding="UTF-8") as file:
-        print(widget_rtl, file=file)
+        with open(out_widget_file, 'w', encoding="UTF-8") as file:
+            print(widget_rtl, file=file)
 
-    logger.info("Selected, implemented, and copied '%s' widget", config['bus'])
+        logger.info("Selected, implemented, and copied '%s' widget", config['bus'])
+    except FileNotFoundError:
+        # Bus might not have a corresponding SV file
+        logger.info("Did not find a seperate SystemVerilog file for '%s' widget", config['bus'])
 
     # Copy over generic srdl2sv_interface_pkg
+    if config['addrwidth_bus_spec']:
+        logger.info("Set address width to '%i', according to '%s' specification",
+                     config['addrwidth'], config['bus'])
+    else:
+        logger.info("Set address width to '%i'", config['addrwidth'])
+
     widget_if_rtl = pkg_resources.read_text(widgets, 'srdl2sv_if_pkg.sv')
 
     out_if_file = f"{config['output_dir']}/srdl2sv_if_pkg.sv"