Change way the order of RTL is determined

By using a dictionary, it will be easier to mix & match the RTL
order dependend on the properties of the field.

This commit also adds anded/ored/xored properties.

srdl2sv/components/field.py

@@ -1,10 +1,10 @@
-import yaml
 import math
+import yaml
 
 from systemrdl import RDLCompiler, RDLCompileError, RDLWalker, RDLListener, node
 from systemrdl.node import FieldNode
 from systemrdl.rdltypes import PrecedenceType, AccessType
-
+from itertools import chain
 
 TAB = "    "
 
@@ -18,6 +18,10 @@ class Field:
         self.rtl = []
         self.bytes = math.ceil(obj.width / 8)
 
+        # Make a list of I/O that shall be added to the addrmap
+        self.input_ports = []
+        self.output_ports = []
+
         ##################################################################################
         # LIMITATION:
         # v1.x of the systemrdl-compiler does not support non-homogeneous arrays.
@@ -43,7 +47,6 @@ class Field:
                 rst_negl = ""
                 rst_active = "active_high"
 
-            print(obj.get_property('reset'))
             # Value of reset?
             rst_value = '\'x' if obj.get_property("reset") == None else obj.get_property('reset')
         except:
@@ -104,12 +107,23 @@ class Field:
 
         indent_lvl += 1
 
-        # Define hardware access (if applicable)
+        # Not all access types are required and the order might differ
-        hw_access_rtl = []
+        # depending on what types are defined and what precedence is
+        # set. Therefore, first add all RTL into a dictionary and
+        # later place it in the right order.
+        #
+        # The following RTL blocks are defined:
+        #   - hw_write --> write access for the hardware interface
+        #   - sw_write --> write access for the software interface
+        #
+        access_rtl = dict([])
 
-        if hw_access == AccessType.rw or hw_access == AccessType.w:
+        # Define hardware access (if applicable)
+        access_rtl['hw_write'] = []
+
+        if hw_access in (AccessType.rw, AccessType.w):
             if obj.get_property('we') or obj.get_property('wel'):
-                hw_access_rtl.append(
+                access_rtl['hw_write'].append(
                     Field.templ_dict['hw_access_we_wel'].format(
                         negl = '!' if obj.get_property('wel') else '',
                         reg_name = obj.parent.inst_name,
@@ -117,7 +131,7 @@ class Field:
                         genvars = genvars_str,
                         indent = self.indent(indent_lvl)))
 
-            hw_access_rtl.append(
+            access_rtl['hw_write'].append(
                 Field.templ_dict['hw_access_field'].format(
                     reg_name = obj.parent.inst_name,
                     field_name = obj.inst_name,
@@ -125,10 +139,10 @@ class Field:
                     indent = self.indent(indent_lvl)))
 
         # Define software access (if applicable)
-        sw_access_rtl = []
+        access_rtl['sw_write'] = []
 
-        # TODO: if sw_access_enabled
+        if sw_access in (AccessType.rw, AccessType.w):
-        sw_access_rtl.append(
+            access_rtl['sw_write'].append(
                 Field.templ_dict['sw_access_field'].format(
                     reg_name = obj.parent.inst_name,
                     field_name = obj.inst_name,
@@ -139,7 +153,7 @@ class Field:
 
             # If field spans multiple bytes, every byte shall have a seperate enable!
             for i in range(self.bytes):
-            sw_access_rtl.append(
+                access_rtl['sw_write'].append(
                     Field.templ_dict['sw_access_byte'].format(
                         reg_name = obj.parent.inst_name,
                         field_name = obj.inst_name,
@@ -147,23 +161,30 @@ class Field:
                         i = i,
                         indent = self.indent(indent_lvl)))
 
-            sw_access_rtl.append("")
-
             indent_lvl -= 1
 
-        sw_access_rtl.append("{}end".format(self.indent(indent_lvl)))
+            access_rtl['sw_write'].append("{}end".format(self.indent(indent_lvl)))
+
+        # Define else with correct indentation and add to dictionary
+        access_rtl['else'] = ["{}else".format(self.indent(indent_lvl))]
+
+        # Add empty string
+        access_rtl[''] = ['']
 
         # Check if hardware has precedence (default `precedence = sw`)
         if precedence == 'PrecedenceType.sw':
-            self.rtl = [*self.rtl,
+            rtl_order = ['sw_write',
-                        *sw_access_rtl,
+                         'else' if len(access_rtl['hw_write']) > 0 else '',
-                        '{}else'.format(self.indent(indent_lvl)),
+                         'hw_write']
-                        *hw_access_rtl]
         else:
-            self.rtl = [*self.rtl,
+            rtl_order = ['hw_write',
-                        *sw_access_rtl,
+                         'else' if len(access_rtl['sw_write']) > 0 else '',
-                        '{}else'.format(self.indent(indent_lvl)),
+                         'sw_write']
-                        *hw_access_rtl]
+
+        # Add dictionary to main RTL list in correct order
+        self.rtl = [
+            *self.rtl,
+            *chain.from_iterable([access_rtl[i] for i in rtl_order])]
 
         indent_lvl -= 1
 
@@ -173,6 +194,36 @@ class Field:
                 field_name = obj.inst_name,
                 indent = self.indent(indent_lvl)))
 
+        #####################
+        # Add combo logic
+        #####################
+        operations = []
+        if obj.get_property('anded'):
+            operations.append(['anded', '&'])
+        if obj.get_property('ored'):
+            operations.append(['ored', '|'])
+        if obj.get_property('xored'):
+            operations.append(['xored', '^'])
+
+        if len(operations) > 0:
+            self.rtl.append(
+                Field.templ_dict['combo_operation_comment'].format(
+                    reg_name = obj.parent.inst_name,
+                    field_name = obj.inst_name,
+                    indent = self.indent(indent_lvl)))
+
+        self.rtl = [
+            *self.rtl,
+            *[Field.templ_dict['assign_combo_operation'].format(
+                field_name = obj.inst_name,
+                reg_name = obj.parent.inst_name,
+                genvars = genvars_str,
+                op_name = i[0],
+                op_verilog = i[1],
+                indent = self.indent(indent_lvl)) for i in operations]]
+
+        # TODO: Set sanity checks. For example, having no we but precedence = hw
+        #       will cause weird behavior.
 
 
     @staticmethod

srdl2sv/components/templates/fields.yaml

@@ -13,6 +13,7 @@ sw_access_field: |-
 sw_access_byte: |-
     {indent}if (byte_enable[{i}])
     {indent}    {reg_name}_{field_name}_q{genvars}[8*({i}+1)-1 -: 8] <= sw_wr_bus[8*({i}+1)-1 -: 8];
+
 hw_access_we_wel: |-
     {indent}if ({negl}{reg_name}_{field_name}_hw_wr{genvars})
 hw_access_field: |-
@@ -29,3 +30,9 @@ field_comment: |-
     {indent}//              sw = {sw_access} {sw_precedence}
     {indent}// reset      : {rst_active} / {rst_type}
     {indent}//-----------------------------------------------
+combo_operation_comment: |-
+
+    {indent}// Combinational logic for {reg_name}_{field_name}
+assign_combo_operation: |-
+    {indent}assign {reg_name}_{field_name}_{op_name}{genvars} = {op_verilog}{reg_name}_{field_name}_q{genvars}
+